Remote Desktop is one of the best functions of Windows 10 which enables remotely located computer devices to connect. With the help of an internet connection, users can share their desktop screen with any other computer device located remotely. It is very useful for business organizations that have their teams located in different locations as they can easily integrate their work without any physical boundaries.

1. Termsrv.dll Patch Windows 10
2. Universal Termsrv Patch

However, sometimes this Remote Desktop Feature won’t work for you because of multiple different reasons such as –

1. Remote Desktop not connected to the computer
2. Windows 10 RDP client not working
3. Remote Desktop won’t be working after the update
4. The feature won’t connect over the internet and many more

But, lucky for you Windows 10 Remote Desktop not working can be easily fixed on your computer. You just need to be a little attentive and have to use the following solutions to fix the remote connectivity problem.

Before get started check and make sure the remote desktop option enabled on both source and the destination computer.

Pro Tip : if your computer is not properly connected to the internet, you won’t be able to use this feature.

Note that this version of Concurrent RDP Patcher patches the dll on Windows 7 RTM, Service Pack 1 and with update KB3003743 which was released in October 2014. Important Updates For 2019 (and October 2018) For four years the termsrv.dll file wasn’t changed and the Concurrent RDP Patcher worked fine from October 2014 onwards. A small handful of them have developed their own fixes (also known as 'byte offsets') to get around various Windows Update issues that break RDP Wrapper. The reason it breaks has to do with programming code updates to the dynamic link library (termsrv.dll) of the remote desktop protocol itself, courtesy of Microsoft. Changing Termsrv.dll Data to Enable Numerous RDP Session To get rid of the constraint on the variety of simultaneous RDP individual links in Windows 10 without making use of rdpwraper, you can change the initial termsrv.dll documents. This is the collection documents made use of by the Remote Desktop Computer Solution. Quote: you can use RDP Wrapper which acts as a middleman between Terminal Services and Service Control Manager. This way you don’t need to touch termsrv.dll fileDownload and extract RDPWrap-v1.6.zip (or newer), then run install.bat as admin. After installation is completed, run RDPConfig.exe. If all items under Diagnostics are green, you should be good to go. From: Multiple RDP (Remote.

Post Contents :-

• 2 Remote desktop not working windows 10
• 3 Disable IPv6 protocol

How to enable Remote Desktop on Windows 10

1. Open Control Panel.
2. Click on System and Security.
3. Under the “System” section, click the Allow remote access link.
4. Under the “Remote Desktop” section, select the Allow remote connections to this computer option.
5. Also, check the ‘Allow Remote Assistant …’ checkbox under Remote Assistance.
6. Click the Apply button the OK.

Remote desktop not working windows 10

Termsrv.dll Patch Windows 10

Well, the Remote desktop feature enabled on both ends but still you are unable to connect to the remote computer? Or getting an error like

Remote Desktop Disconnected.

This computer can’t connect to the remote computer.
Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.

Don’t worry here we have different solutions help to fix Windows 10 Remote desktop connection problems.

Go through your internet connection

It is common knowledge that the Remote Desktop Feature entirely depends upon Internet connectivity. So, foremost, you need to check your internet connection and make sure that everything is working properly between your device and the local internet connection. You can check the network status from your computer if the connection isn’t right, then you can check your internet router and other cables. If you don’t find any problem in your connection, then you can contact your internet service providers as sometimes the server of a data providing company is down.

Pro tip: Press Windows + R, type google.com -t and click ok if you are getting replay like the image shown below then there is no more problem with an internet connection. But if you are not getting replay then you must check and fix your internet connection problem first.

Allow remote desktop from firewall settings

Sometimes your Windows firewall settings won’t let you establish a Remote Desktop connection freely. If the Remote Desktop is blocked by your firewall settings, then you won’t be able to establish a remote connection even if your internet connection is up to date. To check the status of your firewall settings for Remote Desktop, you have to follow these steps –

1. Navigate to Search and type firewall in the box and let Windows Defender Firewall open.
2. Now, open Allow an app or feature through Windows Firewall.
3. And, click to change the settings.
4. Next, you have to find Remote Desktop and check it and press Ok to save the changes instantly.

Here, you can try to connect Remote Desktop and it should be working now. You need to keep one thing in your mind that Remote Desktop is not enabled by the firewall by default so if you are using this feature for the first time, then you have to enable it on your own.

Universal Termsrv Patch

Apart from the Windows firewall settings, you need to also make sure that your antivirus isn’t blocking the Remote Desktop feature. Some antivirus programs interfere with the system settings and to protect your computer, it is a good feature but became trouble if they block the Remote Desktop feature.

If this is your case, then you might have to uninstall the interfering antivirus program to use the Remote Desktop feature. However, you can install the antivirus program which won’t block Remote Desktop to save yourself from all the trouble.

Check RDP service running

If due to some reason remote desktop service not started or stopped you may encounter problems with remote connection. Check and make sure the service is running state by following steps below.

• Press Windows + R, type services.msc and click ok,
• scroll down and locate remote desktop service,
• Right-click remote desktop service and select properties
• Here check its startup set to automatic and its running state otherwise change it.
• Also the same for remote produce call (RPC) service.

Remove your credentials from Remote Desktop

Some users have reported that Remote Desktop won’t connect problem occur with their credentials. So, you can try to remove your credentials from the Remote Desktop feature to test this theory. For this –

1. You have to press the Windows key with S key and type remote settings in the search bar and near click on the Remote Desktop Connection.
2. When Remote Desktop Connection window opens, go to the Advanced tab and click on Settings.
3. Now, just press on Delete Credentials and this will definitely fix the problem for you.

Disable IPv6 protocol

A number of users report disable IPv6 (internet protocol version) help them to fix out this remote desktop issue. By default, Windows prefers IPv6 over IPv4. So if you are having problems using IPv6 to connect to the servers, you can force your computer to use IPv4 only.

• Press Windows + R, type ncpa.cpl and click ok
• Right click on the active network adapter and select properties.
• Look for the checkbox which says Internet Protocol Version 6 (TCP/IPv6), uncheck it.
• Click on OK, and restart your computer.
• Now try to connect to the remote computer.

Use third-party tools

If you are not able to fix the Remote Desktop feature even after changing your device settings, then you can take help from third-party tools. There are plenty of different great third-party tools available that can help you in connecting remotely with another device. Moreover, these tools have a better interface and numerous other features to assist you.

So, you can now freely try to establish remote connections with other computer devices and make your work more efficient with better connectivity. The Windows 10 Remote Desktop, not working problem will not trouble you anymore, just follow the instructions.

Also read:

This has been written about a dozen or more times in various places, but I'm re-hashing it all here mostly for my own record, and to keep it all together. In addition to simply updating the Terminal Services libraries, I've also included information relating to doing so remotely... the commands required for remote service management and resolving issues accessing admin shares.

How to Allow Multiple RDP Sessions in Windows 10

Like in previous client versions of Microsoft operation systems, Windows 10 Pro and Enterprise users can connect to their computers remotely using Remote Desktop service (RDP). There is a restriction on the number of simultaneous RDP sessions: only one remote user can work at a time. When you try to open a second RDP session, the session of the first user is prompted to be closed.

Actually, the number of simultaneous RDP connections is limited rather by the license, which does not allow to create an RDP server based on the workstation for use by several users, than by any technical aspect.

Tip. In Windows 10 Home editions, the incoming remote desktop connections are forbidden at all. The problem, however, can be solved using RDP Wrapper Library.

Let’s consider two ways how to eliminate the restriction of simultaneous RDP connections to Windows 10:

• The Modification of termsrv.dll
• Installing the 'RDP Wrapper Library'

Note. System modifications described in the article will be probably treated as a violation of Microsoft License Agreement with all the consequences that come with it.

Things to remember before editing anything:

1. You may have to change owner of termsrv.dll from TrustedInstaller to Administrators;
2. You will need to stop Remote Desktop Services (in Services MMC); (You won't need to reboot after changes, just re-start the Service)

Of course, anyone doing this should be paranoid and:

1. Create restore point before doing anything else;
2. Take a backup of your current termsrv.dll to restore if it goes wrong;
3. Export a copy of the registry before editing it;

If you're configuring a remote machine, you may need to stop/start the services using command-line as connecting your services control panel to remote machines requires special permissions.

The following command-line will stop the terminal services (Remote Desktop Services) service:
sc machine stop TermService

Windows 8 / 8.1

Thanks to @neurodyne and this link for updated instructions

This works with the following versions of termsrv.dll

x64 - termsrv.dll - 6.3.9600.17095